It is a popular type of all-ceramic crown which is worn to improve the appearance of a tooth which has become stained or disfigured over the years. They are durable, easy to wear and long lasting.

It have a translucent appearance which means that they are indistinguishable from your own teeth. It is hard to spot a zirconia crown amongs natural teeth. 

Zircon- is a bio-compatible materials that is know to withstand tremendous mastication force. Its translucent properties gives it aesthetic look of natural teeth. Its under-structure is made by CAD/CAM technology, a process during which the pinned and sectioned model is scanned with 3D Optical Scanner, designed through computer and restoration milled in pre-sintered zirconia block. The milled frame is sintered for 10 hours to fully gain its high strength and fracture resistance. Finally pre-blended ceramic is pressed over the zirconium oxide under structure and its available for flourascent shade, 7-effect shade and all vita shades.

PINE ZIRCONIA is classified into:

v  Pine Zirconia Premium Plus

v  Pine Zirconia Premium

v  Pine Zirconia Classic

v  Pine Zirconia Basic

v  Pine Zirconia Premium Plus Full Contour

v  Pine Zirconia Premium Full Contour

v  Pine Zirconia Classic Full Contour

v  Pine Zirconia Basic Full Contour

v  Pine Zirconia Translucent

v  Pine Zirconia Monolithic





v  Natural Translucency and excellent aesthetic

v  Highly Bio - compatible

v  Perfect marginal fit modifitable size, shape and color

v  Less tooth removal

v  Single Crown

v  Up to 16 unit bridge

v  Implant prosthesis

v  In bridges up to 8 units can give 4 continuous pontics in anterior and 2 in posterior regions

v  In bridges more than 8 units, it is ideal to have more than continuous pontics in both anterior and posterior region.

v  1 cantilever possible with at least 2 continuous abutments (distal cantilever not advisable; avoid cantilever in canine and molar)

v  Primary telescopes

v  Custom zirconia abutment for a wide variety of implant systems

 

v  Warranty regarding extension, retention, occlusion, contact etc. is only on the basis of the given model.

v  All repetitions and correction should be informed within 7 days and will be accepted only with fresh models along with initially supplied model, work and warranty card.

v  To claim warranty of Pine Dental prosthesis, the patient should consult the same doctor or clinic.

v  Repetitions will be charged at 50% of the actual rate of the work and additional tax, if any.

v  Patient cannot claim warranty in the pricelist will not have any warranty.

Request:

v  Ensure giving temporary crown or bridge after tooth preparation. We won’t be responsible for problems in insertion, if temporary crown or bridge is not given.

v  An order placed, cannot be withdrawn.

v  We need 7 working days to complete a work except Friday and other holidays.

Urgent Orders

v  Will be charge 10% extra. The fabrication time depends on prosthesis type and unit.

Suggestion

v  The proximal margins of the abutments should be parallel or slightly tapering towards occlusal surface. Eliminate undercuts to the maximum. Round all corners.

v  We always prefer perfect rubber base impression. Don’t pour die stone type IV immediately to the rubber base impression. Pour only after 1 hour.

v  Don’t allow the alginate impression to get dried. Pour die stone type IV immediately. If the model thus prepared is found defective (air bubble, broken stump etc.) discard it and take a new impression rather than trying to produce a second model from the old alginate impression.

v  We need upper and lower full Die Stone IV models to check the occlusion correctly.

v  Provide the bite registration in Silicone putty (not in wax), if necessary.

v  The shade will be perfect only if the labial and occlusal clearance is 2mm.

v  VITA classical and VITA 3D Master 9of Ivoclar A-D shade number should be given for ceramic shade selection.

v  Avoid grinding the metal prosthesis at the time of metal trial. This may lead to contamination of metal and ceramic chipped-off.

v  In anterior cases, if patient is satisfied with the temporary crown / bridge, kindly provide a model of that which will help us in imitating the shape and arrangement. Pre - operative models will also be useful in some cases. 

   


Other Products

Customized Abutments

A dental implant is placed in the jawbone so that it can fuse with your natural bone

Get Details

Custom Abutments

MOUTHGUARD

Is a protective device for the mouth that covers the teeth and gums to prevent and reduce injury to the teeth

Get Details

MOUTH GUARD

BPS DENTURE

The Biofunctional prosthetic system dentures were designed to combine advanced technology

Get Details

BPS DENTURE

CERCON (DEGUDENT)

Is an excellent material choice for metal – free restorations because of its biocompatibility, strength, durability and beauty.

Get Details

CERCON (DEGUDENT)